[LOW odor!]Stencil cleaner, HA-4900U

[toc title="Contents"]

Introduction

HA-4900U is a hydrocarbon-based cleaner. Significantly lower odors than conventional detergents!

Advantages of HA-4900U

	Low odor HA-4900U is consisted without 22 substances causing offensive odors and amine, aldehyde, etc., and has no unpleasant odors compared with conventional cleaner.
	High cleaning property Specially formulated cleaner HA-4900U will strongly remove solder paste from stencils after printing.
	Easy to use Since HA-4900U is free from nonvolatile ingredients, rinsing after cleaning is not necessary, and it can be easily wiped off with a waste cloth.
	Less damage to stencils / masks HA-4900U is consisted of neutral components and does not damage the metal surface.
	Low toxicity HA-4900U does not contain halogen-based solvents (chlorine, bromine, or fluorine-based) or highly toxic ingredients (toluene, xylene, IPA, etc.).

General characteristics

Main component	Hydrocarbon-based
Specific gravity	0.8
Boiling point	150℃ or more
Flash point	43℃
UN Class	3
UN No	1993
Packing Group	Ⅲ
Packaging	14kg/UN can

Related articles and products

	Products information Metal / screen mask cleaner, HA series Can be used by hand or fed into cleaning equipment! A wide range of products are prepared for different types of pastes and adhesives! It is also a great alternative to IPA.
	Products information [Long seller] Stencil cleaner, HA-1040U The high dissolving power of the cleaning agent cleans even the smallest openings.
	Trouble solution How to clean SMT stencils The solder paste printing process is one of the most important processes in the PCB assembly process, and the cleanliness of the SMT stencil used is the key to improving the quality of the process and the product. On this page, we examine the optimal SMT stencil cleaning method based on the results of cleaning the SMT stencil with IPA, cleaning agents, and ultrasonic cleaners.
	PCB Mounting Columns Printing process and trouble with metal stencils In the reflow process of electronics packaging, the most common method of supplying solder is to print solder paste using a metal mask. This section introduces the explanation of metal masks, the printing process, possible problems and cleaning.
	Trouble solution "Cleaning" in Electronics industory Cleaning related to the mounting process is explained using the example of the double-sided mounting process, in which inserted components are mounted (flow process) after surface mounting (reflow process) .

Inquiry and question
Requests for SDS

Please be as specific as possible in your inquiry.
Depending on the contents of your inquiry, it may take some time for us to reply to you.
For SDS, please contact us from [Requests for SDS] in the upper right corner.
※Sales through the inquiry form are strictly prohibited.