Carrier pallet cleaning system PALLETCLEANER PCLT - KAKEN TECH CO., Ltd.

Content

1. Introduction
- 1.1. Advantages of PALLETCLEANER PCLT
2. System introduction
3. PALLETCLEANER Specification
4. Designated cleaning liquid KakenClean series
5. Related articles and products

Introduction

The Pallet Cleaner PCLT is a system for cleaning flux from carrier pallets used in the flow soldering process (sometimes referred to as carriers, flow pallets, etc.).
PCLT uses a shower system instead of ultrasonic or brush cleaning, which may deform the pallet opening.

Advantages of PALLETCLEANER PCLT

	Multiple pallet cleaning Up to 15 flow pallets (carrier pallets, solder pallets) up to 400mm square can be fed into the system.
	Large opening The opening size is 760x440mm and the door opens wide for easy loading and unloading of pallets. The pallet stand can also be removed to allow cleaning of large reflow parts.
	Simple liquid exchange When draining, simply place an empty can of PARELECTRIN, a special cleaning agent, in the drain port and drain without getting your hands dirty.
	100V power supply The unit can be started up using only a 100V power supply, eliminating the need for a 200V power supply and making it easier to install!
	Low cost More affordable than conventional pallet cleaners!

System introduction

The newly developed PALLETCLEANER PCLT can clean not only pallets but also parts in the reflow oven. How much flux deposited on a large part (approx. 30cm x 50cm) can be cleaned in just 30 minutes? Please take a look!

PALLETCLEANER Specification

Model	PCLT
Machine dimensions	W950×D500×H1,250mm
Opening size	760x440mm ☆PCLT can clean up to 400mm square pallets.
Power input	Single phase 100V

Designated cleaning liquid KakenClean series

	Products information Carrier pallet cleaning agent, PALLETCLEAN Carrier pallets cleaning agent PALLETCLEAN series is a cleaning agent for carrier pallets used in the wave soldering process. It powerfully removes flux contamination from carrier pallets. It can also be utilized for cleaning parts inside reflow oven such as radiators!

Related articles and products

	Trouble solution "Cleaning" in Electronics industory Cleaning related to the mounting process is explained using the example of the double-sided mounting process, in which inserted components are mounted (flow process) after surface mounting (reflow process) .

Tags: carrier pallet, flow pallet, flux cleaning

Inquiry and question
Requests for SDS

Please be as specific as possible in your inquiry.
Depending on the contents of your inquiry, it may take some time for us to reply to you.
For SDS, please contact us from [Requests for SDS] in the upper right corner.
※Sales through the inquiry form are strictly prohibited.

Contact Us

Inquiry form